Automatic Frame Type Automatic Palletizer Machine 600 Bags / Hour
Product Introduction
The frame type palletizer is mainly composed of conveyors, palletizing manipulator, lifting platform, and electric control. PLC control system is adopted to realize automatic palletizing, which is of simple operation, tidy palletizing and good storing. This type of palletizer is applicable for the palletizing of products in fertilizer, feed, seed, food and many other industries.
Work Flow
Put empty pallet to waiting station → convey the empty pallet to palletizing station → lift the empty pallet to palletizing position → palletize continuously → convey the loaded pallet to finished product station
Equipment Composition
1. Empty pallet station (conveyor)
2. Control box
3. Palletizing machine
4. Electric cabinet
5. Automatic lifting platform
6. Finished product station (conveyor)
Features
A. Stable speed and tidy and beautiful palletized shape;
B. HMI touch screen used to realize functions including dynamic display, monitoring, counting, fault output, which is easy and simple for operation;
C. System drives are all imported durable and reliable motors;
D. Control system adopts PLC, frequency convertor and a variety of sensors to work together to complete automatic/manual operation.
Technical Parameters
| Palletizing speed |
600bag/h |
| Pallet dimension |
W1300-1500*L1600-1800mm |
| Palletizing height |
1200-1800mm |
| Power supply |
380V 50HZ |
| Installed capacity |
7KW |
| Power consumption |
3KW |
| Air supply |
0.6-0.8Mpa |
| Flow |
0.65m³/min |
| Machine dimension |
L2500*W2300*H3000mm |
Main Components
| Photoelectric switch |
OMRON |
| PLC and extension unit |
OMRON
|
| Push button |
Schneider |
| Indicator light |
Schneider |
| Selective switch |
Schneider |
| Key switch |
Schneider |
| Emergency stop switch |
Schneider |
| Air switch |
Schneider |
| Touch screen |
HITECH |
| Servo motor |
Yaskawa |
| Motor for lifter |
SEW |
| Main bearings |
SKF
|
After-sales Service
1. Operator training will be provided to the Buyer after the completion of installation and commissioning, and complete set of technical support for installation and commissioning will also be provided;
2. Training for operators: operating process, safety issues, attentions, etc.;
3. Training for maintenance personnel: mechanical structure, work principle, daily maintenance, trouble shooting, etc.;
4. Machine warranty period is 12 months. In warranty period, we will take the responsibility to repair or replace defective or damaged products, in case such defect or damage is not caused by the Buyer or it is the result of Seller’s mistake. (Travel expenses are not included and shall be agreed on by both parties.) In warranty period, if any damage is caused by the Buyer’s operation or improper maintenance, the Seller shall be liable for repair or replacement. But component(s) cost and repair fees shall be borne by the Buyer.
5. When it is out of warranty, the Buyer shall pay for the cost of exchanging components for each service; in case our technicians shall be dispatched to the Buyer’s site, round trip air ticket, local transportation and local expenses for board and lodging shall be borne by the Buyer.
