Carcoal Powder Activated Carbon Graphite Bagging Machine Automatic Valve Bag Filling
One full automatic pneumatic type valve bag filling machine comprises of:
1. PVPE (Pneumatic Valve Packing Equipment);
2. Manipulator (mechanical arm);
3. Bag magazine;
4. Conveyor.
The PVPE (Pneumatic Valve Packing Equipment) is an air flow bagger designed to fill dry solids, like granulated pellets, cement, adhesives, renders, powders, small aggregates and flaked products into valve bags. The PVPE works on the basis of air fluidisation of the product and differential pressure resulting in product flow into valve bags. This equipment can also be customized as per different customers’ special requirements. The PVPE Packer weighs the bag and contents as it is being filled. The filling speed relates to material ratio, fluidity, granularity, humidity, etc.
Bag Magazine (Empty bag depot):
It is big enough to keep 120 empty bags here and there is still place more bags. This bag magazine coordinates the automatic bag-fetching manipulator to realize fully automatic operation of bag taking. When the present batch of bags are used up, the next batch will be automatically replenished. The operator on site can put the bags into bag magazine while the machine is running. So there is no need to stop the production for supplement which will ensure continuous packing.
Materials to Fill:
Including but not limited to dry powders, premixes or materials of diameter less than 7 mm
Typical materials: PVC powder, renders, cement, gypsum powder, dry mortar, fine sand, lime powder, tile adhesives, joint mixture, charcoal powder, graphite, grain, flour, chemical powders, perlite, and all kinds of powdery additives.
Main Data:
| Packing range |
10-50 kg |
| Packing accuracy |
±0.5~1% |
| Valve hole size |
50 mm, filling spout |
| Valve hole length |
90-165 mm |
| Bag length |
90-180 mm |
| Bag height |
300-900 mm |
| Air consumption |
To be specified |
| Material feeding mode |
Slow and quick two modes |
If you want to change bag size?
1. for changing bag length, you just need adjust length value on the machine controller
2. for changing bag width, you need change another set bag former. one kind bag width correspond one bag former mode.
If you want to change bag weight?
Generally, one set machine can pack bags of different weight, but the changed weight at a certain weight range. If out of this range, then need change another set measuring systerm (such as volumetric cup, screw/auger feeder, piston pump and liquid pump), of course except multihead electric weigher.
